From: Bob (cciebob@comcast.net)
Date: Sun May 15 2005 - 01:00:37 GMT-3
I use 12.2(15)T14 enterprise. All of my routers are 16 flash 64 memory.
This supports IPV6, IS-IS, etc. See show ver below. Hope this helps.
Router#sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T14, RELEASE
SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 28-Aug-04 06:47 by cmong
Image text-base: 0x80008098, data-base: 0x819608A4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.2(15)T14, RELEASE SOFTWARE
(fc4)
Router uptime is 3 hours, 50 minutes
System returned to ROM by reload
System image file is "flash:c2600-j1s3-mz.122-15.T14.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of
memory.
Processor board ID
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
netchild ccie
Sent: Saturday, May 14, 2005 7:49 PM
To: ccielab@groupstudy.com
Subject: IOS that support ipv6
Hello,
I have 2611XM router with 64 ram and 16 flash. I tried to use 12.2t ip plus
ios but there was any that I can download from cisco site. The minimum is
64ram and 32 flash. Is there away to find older 12.2t that only need 64ram
and 16 flash ?!
Please don't tell me upgrade your router memory, I'm broke :~(
NetChild,
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3