From: Long Kwok (lkwok@ccieunix.com)
Date: Sat May 14 2005 - 23:29:19 GMT-3
Thanks for the reply Bob , here is the doc that states in the section
headed " Prerequisites for FRTS " maybe it is just my interpretation ,
just like on the lab ;)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft
/122t/122t13/frqosmqc.htm
TIA , Long
_____
From: Bob Sinclair [mailto:bsin@cox.net]
Sent: Saturday, May 14, 2005 6:43 PM
To: Long Kwok; ccielab@groupstudy.com
Subject: Re: Using MQC framework for FRTS
Long Kwok,
In my experience, you may shape only class class-default when you do
PER-PVC shaping. If you apply a service-policy with the shape command
on the physical or sub interface you can shape any class. I do not know
why this is the case.
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: Long Kwok <mailto:lkwok@ccieunix.com>
Sent: Saturday, May 14, 2005 5:43 PM
Subject: Using MQC framework for FRTS
According to cco docs , that when using the MQC framework to
configure
your FRTS settings , you must use the class class-default does
anyone
understand why this is so ? or if it is accurate ?
TIA , Long
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3