From: Bob Sinclair (bsin@cox.net)
Date: Sat May 14 2005 - 22:42:51 GMT-3
Long Kwok,
In my experience, you may shape only class class-default when you do PER-PVC
shaping. If you apply a service-policy with the shape command on the physical
or sub interface you can shape any class. I do not know why this is the case.
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: Long Kwok
To: ccielab@groupstudy.com
Sent: Saturday, May 14, 2005 5:43 PM
Subject: Using MQC framework for FRTS
According to cco docs , that when using the MQC framework to configure
your FRTS settings , you must use the class class-default does anyone
understand why this is so ? or if it is accurate ?
TIA , Long
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3