From: Lanny Ballard (lanny26ga@hotmail.com)
Date: Sat May 14 2005 - 11:19:41 GMT-3
OK,
I'm having trouble with getting rsvp to work, and I need some help.
In particular I am trying to get dlsw rsvp to work. I have copied configs
straight from the doccd, but I can't get it to work correctly
It seems that rsvp is not trying to reserve resources
My configs are
R1
dlsw local-peer peer-id 10.1.1.1
dlsw rsvp default
dlsw remote-peer 0 tcp 10.1.1.2
nterface Serial0/1
ip address 10.1.1.1 255.255.255.0
fair-queue 64 256 37
ip rsvp bandwidth
R2
dlsw local-peer peer-id 10.1.1.2
dlsw rsvp default
dlsw remote-peer 0 tcp 10.1.1.1
interface Serial0/0
ip address 10.1.1.2 255.255.255.0
fair-queue 64 256 22
ip rsvp bandwidth
The dlsw peers are coming up
My output from R1 shows:
r1#sh dlsw peer
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
TCP 10.1.1.2 CONNECT 56 30 conf 0 0 0
00:14:1
r1#sh ip rsvp sen
To From Pro DPort Sport Prev Hop I/F BPS
10.1.1.1 10.1.1.2 TCP 2065 47503 10.1.1.2 Se0/1 10K
10.1.1.2 10.1.1.1 TCP 47503 2065 10.1.1.1 10K
r1#sh ip rsvp req
To From Pro DPort Sport Next Hop I/F Fi Serv
BPS
r1#
Notice nothing shows up under SHOW IP RSVP REQ
nor does anything appear under ip rsvp install
I am running 12.2.(15)T on my routers, is there an issue with this, can
someone verify that it works with this code? Or let me know what I'm doing
wrong?
TIA!
Lanny
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3