From: Loc Pham (loc.pham@comcast.net)
Date: Sat May 14 2005 - 10:49:20 GMT-3
Hello, San
You need to associate a dialer map for each every dialer watch-list route you defined. But you are not using the legacy ISDN.
May be someone can jump in and help...
lP.
> Thanks Loc,
>
> After making sure my configurations are correct from the link, i
> reloaded & everything is ok.
> Is ther order of creating interfaces & assocations that i need to follow ?
>
>
> Below are the correct configs:
>
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-5ess
> ppp multilink
> !
> interface Ethernet0/1
> ip address 191.1.48.4 255.255.255.0
> half-duplex
> !
> interface Dialer1
> ip address 191.1.45.4 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 120 either
> dialer string 60002
> dialer watch-group 1
> ppp multilink
> ppp multilink links minimum 2
> !
> router eigrp 10
> network 191.1.4.4 0.0.0.0
> --More--
> *Mar 1 00:07:02.179: Di1 DDR: idle timeout
> *Mar 1 00:07:02.179: DDR: Dialer Watch: watch-group = 1
> *Mar 1 00:07:02.179: DDR: network 150.1.6.0/255.255.255.0 UP,
> *Mar 1 00:07:02.179: DDR: primary DOWN
> /access-list
> filtering...
> access-list 145 permit icmp host 191.1.45.4 host 191.1.45.5
> dialer watch-list 1 ip 150.1.6.0 255.255.255.0
> dialer watch-list 1 delay disconnect 300
> dialer-list 1 protocol ip list 145
>
>
> /SAN
>
>
>
> On 5/12/05, Loc Pham <loc.pham@comcast.net> wrote:
> > Hello San , James,
> > I done IEWB lab (# 3? ) recently and your # 1 seem to functional otherwise:
> > http://www.cisco.com/warp/public/129/bri-backup-map-watch.html
> > So I think the " dialer idle-timeout " will not disconnect your ISDN in this
> case. I can not test it at that time ( have a 12.2 on 2503 ) since the " dialer
> watch-list disconnect " is not available .
> > May be someone can run & validate with debug ppp packet.
> > lP.
> >
> >
> > > Good Spot -
> > >
> > > I think both, otherwise you are not waiting long enough
> > >
> > > So if delay disconnect > current idle timeout
> > >
> > > then you need to alter the idle timeout.
> > >
> > > -----Original Message-----
> > > From: san [mailto:san.study@gmail.com]
> > > Sent: 12 May 2005 04:02
> > > To: Cisco certification
> > > Subject: Dialer watch scenario
> > >
> > >
> > > Task:
> > > ISDN circuit should only be disconnected after the FR circuite comes
> > > back up and has been stable for 5 minutes ?
> > >
> > >
> > > Probable Answer:
> > >
> > > 1. "dialer idle time 300"
> > >
> > > 2. dialer watch-list 1 delay disconnect 300
> > >
> > >
> > > Results:
> > >
> > > If i use only dialer watch-list disconnect 300, ISDN is disconnected
> > > by default idle timer 120 seconds. Is this accepted ? or should i use
> > > both combination ?
> > >
> > >
> > > /SAN
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > **********************************************************************
> > > *********** Department of Agriculture and Food ***************
> > >
> > > The information contained in this email and in any
> > > attachments is confidential and is designated solely
> > > for the attention and use of the intended recipient(s).
> > > This information may be subject to legal and professional
> > > privilege. If you are not an intended recipient of
> > > this email, you must not use, disclose, copy,
> > > distribute or retain this message or any part of it.
> > > If you have received this email in error, please
> > > notify the sender immediately and delete all copies of
> > > this email from your computer system(s).
> > > **********************************************************************
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:58 GMT-3