From: kuldip singh (dipa.singh@gmail.com)
Date: Thu May 12 2005 - 09:16:49 GMT-3
Hi Maraklas,
I never got ISIS to work over point-to-point link.
But you probably
need to change the point-to-point link to multipoint or run it over GRE tunnel.
On 5/12/05, Marakalas <marakalas@yahoo.com> wrote:
> Hi guys, I'm busy configuring ISIS across a F/R cloud
> in the lab environment. However, I'm getting
> encapsulation errors when debugging. What I did was to
> configure frame-relay map clns 412 broadcast. This is
> on the multipoint interfaces. What should be
> configured on the point-to-point interfaces to have
> ISIS working between two neighbours?
>
> Thanks in advance.
>
> Yahoo! Mail
> Stay connected, organized, and protected. Take the tour:
> http://tour.mail.yahoo.com/mailtour.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3