From: san (san.study@gmail.com)
Date: Tue May 10 2005 - 02:33:26 GMT-3
Taylor,
I also faced exactly same problem. I don't know a way to resolve it.
(tried "static rp address to spoke & auto-rp address to spoke...with
& without pim NBMA mode...with sparse mode )
Problem only clears only if i move RP to Hub. Lets see if anyone can
help us to figure this problem.
/SAN
On 5/9/05, Wang, Ting (Taylor) <wangting@avaya.com> wrote:
> Hi All,
> I faced a problem on the multicast NBMA. The R1 is the Hub , R5, R6 are the spoke.
>
> R1 S0/0 --- R2 and others
> |
> | |
> | NMBA |
>
> s0/0 S0/0
> Ether - R5 ( RP) R6--- Ether (225.1.1.1)
>
> If one Spoke ( R5 in this case) is RP and the group member is in another spoke( R6, e.g) , the RP can't receive the join message. I notice from the R6 that the PIMv2 join message was sent to the S0/0 ip addresss of R5, but R5 never get it. The PIM NBMA mode can't help. I guess R1 doesn't forword the PIMv2 packet to R5 correctly. Anyone have the idea?
>
> Thanks,
> Taylor
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3