From: san (san.study@gmail.com)
Date: Mon May 09 2005 - 01:17:54 GMT-3
Mani,
According to my understanding:
This is like selecting the best path for common connections coming
into Hub from two routers (spokes). Hub will prefer the low cost
neighbor. This will happen only if R1 & R2 has a common LAN from
where DLSW is initiated.
/SAN
On 5/8/05, mani poopal <mani_ccie@yahoo.com> wrote:
> Hi Guys,
>
> In dlsw what is the reason of cost command. I know default cost is 3 and lower cost is preferred. Pls look at following configs.
>
> Hub router config:(R3 is hub)
> dlsw remote-peer 0 tcp 15.15.2.2 cost 1-->to R1
> dlsw remote-peer 0 tcp 15.15.2.2 cost 2-->to R2.
>
> Can this config be given on a spoke router and pushed to the hub. In the above config the configurations are given on the hub router..
> Will the hub maintains connectivity with both spokes(and prefer R1) or only with R1 and disconnect with R2
>
> I took this sample config from IEWB
>
> any help is appreciated.
>
> thanks
>
> Mani
>
> B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
> (416)431 9929
> MANI_CCIE@YAHOO.COM
>
> ---------------------------------
> Discover Yahoo!
> Have fun online with music videos, cool games, IM & more. Check it out!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3