From: Vijay Ramcharan (vramcharan@thedeal.com)
Date: Mon May 02 2005 - 17:55:13 GMT-3
Impossible. I believe those are pointers to memory locations/addresses.
See the link below.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
iprrp_r/ip2_s2g.htm#wp1041583
Vijay Ramcharan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Golia, Jeff
Sent: Monday, May 02, 2005 4:42 PM
To: Group Study (E-mail)
Subject: Sh ip bgp nei PATHS in hex?
Hi All,
When using the sh ip bgp nei paths command the results show in hex. How
can
I get them to display in dotted decimal? TIA
SW2#sh ip bgp nei 204.12.1.254 paths
Address Refcount Metric Path
0x12E2728 2 0 54 i
0x12E2644 2 0 54 50 60 i
0x12E26DC 2 0 54 i
0x12E2690 4 0 54 i
SW2#
Jeff Golia, CCNP MCSE
Network Administrator
Transworld Port and Distribution Services
Wilmington, Delaware
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:56 GMT-3