From: boby2kusa (boby2kusa@hotmail.com)
Date: Fri Apr 29 2005 - 15:35:08 GMT-3
reflector port is usually used mainly for RSPAN, it usually used one of the
port (not connected is fine) to reflect the mirrored traffic back to the
RSPAN vlan. Reflector port is not necessary on SPAN since the SPAN is local
mirroring.
Hope that is clear.
----- Original Message -----
From: "Bob" <cciebob@comcast.net>
To: <ccielab@groupstudy.com>
Sent: Thursday, April 28, 2005 5:46 PM
Subject: monitor session reflector port
> Can anyone help me understand what a reflector port is used for? I have
> setup span and rspan (monitor sessions) in the past and I have never had
to
> use this.
>
> I still don't see it why it is needed after reading
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225se/3550scg/sw
> span.htm
>
> Thanks, Bob
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:10 GMT-3