From: john matijevic (john.matijevic@gmail.com)
Date: Wed Apr 27 2005 - 11:02:25 GMT-3
Hello Nizar,
What makes you suspect that the latency is due to spaning-tree?
Did you bring a new switch into the network? Did you make any changes to
spanning-tree configuration?
If you have a spanning-tree issue, you can look at commands like show
spanning-tree to help determine the problem.
Sincerely,
John
On 4/27/05, Adminl@kuix.com <Adminl@kuix.com> wrote:
>
> Dears, I have 2 questions
>
> Q1:
>
> If I have alot of edge switches with 2 core 6500,
>
> Some times I facing slow response,some times the reply reaches to 1000ms
>
> I know this is spanning-tree problem,but what the commands which make me
> sure Its spanning-tree
>
> I want Just the major commands & which the important lines & parts I
> have to take care?
>
> Q2:
>
> I have Multiple vlans, & I want to assign Multple DHCP for each vlan,How?
>
> For example:
>
> all users in vlan 1 should take 10.10.10.0/24 <http://10.10.10.0/24>
>
> all users in vlan 2 should take 10.20.20.0/24 <http://10.20.20.0/24>
>
> all users in vlan 3 should take 10.30.30.0/24 <http://10.30.30.0/24>
>
> ETC..
>
> Thanx
>
> Nizar
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- John Matijevic, CCIE #13254 U.S. Installation Group Senior Network Engineer 954-969-7160 ext. 1147 (office) 305-321-6232 (cell)
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:09 GMT-3