From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Sat Apr 23 2005 - 19:59:01 GMT-3
The messages are different. Seems to me that it is one packet only but the
debug is showing the different steps to forward it,
-- Richard
-----Original Message-----
From: gladston@br.ibm.com [mailto:gladston@br.ibm.com]
Sent: Saturday, April 23, 2005 10:36 PM
To: ccielab@groupstudy.com
Subject: Debup IP Packets on 3550
why 3 packets?
cat2#p
Protocol [ip]:
Target IP address: 172.16.18.8
Repeat count [5]: 1
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 172.16.18.8, timeout is 2 seconds:
00:55:04: datagramsize=100, IP 85: s=172.16.19.9 (local), d=172.16.18.8,
totlen 100, fragment 0, fo 0, cef process switched
00:55:04: ICMP type=8, code=0
00:55:04: datagramsize=100, IP 85: s=172.16.19.9 (local), d=172.16.18.8
(Vlan19), totlen 100, fragment 0, fo 0, sending
00:55:04: ICMP type=8, code=0
00:55:04: datagramsize=114, IP 85: s=172.16.19.9 (local), d=172.16.18.8
(Vlan19), totlen 100, fragment 0, fo 0, sending full packet
00:55:04: ICMP type=8, code=0.
Success rate is 0 percent (0/1)
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3