From: amir cohen (avi_patish@yahoo.com)
Date: Sat Apr 23 2005 - 19:30:56 GMT-3
thanx guys,
got it:-)
amir
--- Brian Dennis <bdennis@internetworkexpert.com>
wrote:
> > % List#100-telnet already contains this IP address
>
> The router is telling you that the dynamic entry is
> already active. Do
> a "show ip access-list 100" to verify this. To
> clear the dynamic entry,
> use the "clear ip access-template" command.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
>
> bdennis@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> amir cohen
> Sent: Friday, April 22, 2005 10:42 PM
> To: ccielab@groupstudy.com
> Subject: Autocommand for username
>
> Hello,
>
> i need some help in understanding autocommand:
>
> this is my config:
>
> ======================================
> username test password 0 test
> username test autocommand access-enable timeout 5
>
> !
> access-list 100 dynamic telnet timeout 10 permit ip
> any any
> access-list 100 permit tcp 140.10.101.96 0.0.0.7 any
> eq telnet
> !
>
> =================================
>
> wheb i telneting from the above IP's i got:
>
>
> R6#140.10.101.7
> Trying 140.10.101.7 ... Open
>
>
> User Access Verification
>
> Username: test
> Password:
> % List#100-telnet already contains this IP address
> pair
> [Connection to 140.10.101.7 closed by foreign host]
>
> Any ideas?
>
>
> Thanx
> Amir
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3