From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Apr 07 2005 - 18:06:31 GMT-3
Dustin,
Download 12.2(15)T14 Enterprise Plus for the 2600XM. This image
supports OSPFv3. Boot into rommon and issue the tftpdnld -r command to
boot the image from TFTP. The filename c2600-js-mz.122-15.T14.bin.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> dusth@comcast.net
> Sent: Thursday, April 07, 2005 3:48 PM
> To: marvin greenlee; ccielab@groupstudy.com
> Subject: RE: IE Workbook - OSPF IPv6 configuration [bcc][faked-from]
>
> Routers I have are 2610 and 2611.
>
> Dustin
> -------------- Original message --------------
>
> > What hardware platform is the router? If the platform doesn't
support
> IPv6
> > OSPF, it won't actually start a process, even though it takes the
> command.
> >
> > Marvin Greenlee, CCIE#12237, CCSI# 30483
> > Network Learning Inc
> > marvin@ccbootcamp.com
> > www.ccbootcamp.com (Cisco Training)
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > dusth@comcast.net
> > Sent: Thursday, April 07, 2005 12:58 PM
> > To: ccielab@groupstudy.com
> > Subject: IE Workbook - OSPF IPv6 configuration [bcc][faked-from]
> > Importance: Low
> >
> > Hi all,
> > I have trouble with configuring IPv6 for OSPF. When I issued the
command
> > , router did not take me into routeing protocol
> > configuration mode but still in the global configuration mode
instead
> and
> > can not issue any OSPF ipv6 command after that at all.
> > Here is an example:
> > Rack1R1(config)#ipv6 unicast-routing
> > Rack1R1(config)#int f0/0
> > Rack1R1(config-if)#ipv6 address 2001:cc1e:1:3::/64 e
> > Rack1R1(config-if)#exit
> > Rack1R1(config)#ipv6 router ospf 1
> > Rack1R1(config)#
> > I'm using IOS ver 12.2(15)T8
> > Could someone please help.
> >
> >
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:54 GMT-3