From: gladston@br.ibm.com
Date: Tue Apr 05 2005 - 15:18:07 GMT-3
Would you have an example of using aging timers with 'port-secure' when static secure addresses are configured on a port?
=============
quoted
Enabling and Configuring Port Security Aging
You can use port security aging to set the aging time for static and dynamic secure addresses on a port. Two types of aging are supported per port:
AbsoluteThe secure addresses on the port are deleted after the specified aging time.
InactivityThe secure addresses on the port are deleted only if the secure addresses are inactive for the specified aging time.
Use this feature to remove and add PCs on a secure port without manually deleting the existing secure MAC addresses and to still limit the number of secure addresses on a port. You can enable or disable the aging of statically configured secure addresses on a per-port basis.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225seb/scg/swtrafc.htm#wp1038501
===============
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:53 GMT-3