ISDN dialer Load-threshold and PPP multilink

From: simon hart (simon.hart@btinternet.com)
Date: Fri Apr 01 2005 - 13:56:14 GMT-3

• Next message: Golia, Jeff: "IP CEF"
• Previous message: eugeneonline: "CCIE Bootcamp in the UK"
• Next in thread: Sundar Palaniappan: "Re: ISDN dialer Load-threshold and PPP multilink"
• Maybe reply: Sundar Palaniappan: "Re: ISDN dialer Load-threshold and PPP multilink"
• Maybe reply: simon hart: "RE: ISDN dialer Load-threshold and PPP multilink"
• Maybe reply: Hogo, Trust: "RE: ISDN dialer Load-threshold and PPP multilink"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi All,

I am getting a little confused as to when to use ppp multilink in
conjunction with dialer load threshold.

If I am asked to

1. use ppp on an ISDN link

2. to bring up both B channels when the link is 50% utilised

This can be achieved by

encapsulaton ppp
&
dialer load-threshold 128 either

My question is what advantage is there in using the ppp multlink command as
well? The above configuration works without the ppp multilink command,
therefore would I be penalised for missing the ppp multilink command??

TIA

Simon

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.8.4 - Release Date: 27/03/2005

• Next message: Golia, Jeff: "IP CEF"
• Previous message: eugeneonline: "CCIE Bootcamp in the UK"
• Next in thread: Sundar Palaniappan: "Re: ISDN dialer Load-threshold and PPP multilink"
• Maybe reply: Sundar Palaniappan: "Re: ISDN dialer Load-threshold and PPP multilink"
• Maybe reply: simon hart: "RE: ISDN dialer Load-threshold and PPP multilink"
• Maybe reply: Hogo, Trust: "RE: ISDN dialer Load-threshold and PPP multilink"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:51 GMT-3