From: Ed Lui (edwlui@gmail.com)
Date: Thu Mar 24 2005 - 13:24:55 GMT-3
R1(config)#int e0
R1(config-if)#ip add
R1(config-if)#ip address dhcp
R1(config-if)#ip address dhcp ?
client-id Specify client-id to use
<cr>
On Thu, 24 Mar 2005 08:18:05 -0800 (PST), Andy <skystock51@yahoo.com> wrote:
> R1 (fast 0/0) --------------------- (fast 0/0) R2
>
> I want to make R1 a dhcp server and R2 is a static
> client and I have the the following config
>
> R1
>
> ip dhcp pool Mars
> host 172.16.2.254
> hardware-address 02c7.f800.0422 ieee802
> client-name Mars
>
> int fast 0/0
> ip add 172.16.2.1 255.255.255.0
>
> R2
>
> Int fast 0/0
> Ip add dhcp
>
> This config does not assign ip address to R2 can any
> one help?
>
> I have the link below but it still does not work.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipras_r/1rfdhcp.htm#wp1017558
>
> where can I find the following information on:
>
> For a list of media type codes, refer to the "Address
> Resolution Protocol Parameters" section of RFC 1700,
> Assigned Numbers.
>
> For Cisco router
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3