From: marvin greenlee (marvin@ccbootcamp.com)
Date: Wed Mar 23 2005 - 15:12:50 GMT-3
routing interface
Configures interface-specific OSPF routing parameters. This command is the
main command for all OSPF interface submode commands. (Use the router ospf
command to configure global parameters and to enable OSPF routing through
the firewall.) OSPF routing is not supported on the PIX 501.
[no] routing interface interface_name
Subcommands to the routing interface command:
[no] ospf authentication [message-digest | null]
[no] ospf authentication-key password
Cisco - PIX command Reference - routing interface -
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref
/mr.htm#wp1097926
Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Michael Wong
Sent: Wednesday, March 23, 2005 9:27 AM
To: ccielab@groupstudy.com
Subject: PIX OSPF Authentication MD5 [bcc][faked-from]
Importance: Low
I could not find commands under my PIX 515 to define the MD5 key for ospf
authentication. My pix is running 6.3(3)
for example I could enter:
router ospf 1
network 1.1.1.0 255.255.255.0 area 2
area 2 authentication message-digest-key
But, I could not find something similar as "ip ospf mess 1 md5 cisco" to
config on the PIX to assign the MD5 password for the link. Could anyone
tell me where to config such?
thanks,
Michael
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3