From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Tue Mar 22 2005 - 11:17:08 GMT-3
It is possible, I have just done it. Using redistribute conn - route-map
I needed to do it without changing the network type because that's what the
question specified.
-----Original Message-----
From: Annalisa Sciacovelli [mailto:a.sciacovelli@retis.it]
Sent: 22 March 2005 14:09
To: Lee Donald
Subject: Re: Adding Loopbacks into the OSPF Process
i think that it isn't possible
why did you want to change the mask whitout network type?
----- Original Message -----
From: "Lee Donald" <Lee.Donald@t-systems.co.uk>
To: "Annalisa Sciacovelli" <a.sciacovelli@retis.it>; "Lee Donald"
<Lee.Donald@t-systems.co.uk>
Sent: Tuesday, March 22, 2005 2:59 PM
Subject: RE: Adding Loopbacks into the OSPF Process
> WITHOUT changing the network type???
>
>
>
> -----Original Message-----
> From: Annalisa Sciacovelli [mailto:a.sciacovelli@retis.it]
> Sent: 22 March 2005 13:56
> To: Lee Donald
> Subject: Re: Adding Loopbacks into the OSPF Process
>
> interface command
>
> ip ospf network type
>
> bye
> Annalisa
> ----- Original Message -----
> From: "Lee Donald" <Lee.Donald@t-systems.co.uk>
> To: "'Cisco certification'" <ccielab@groupstudy.com>
> Sent: Tuesday, March 22, 2005 2:54 PM
> Subject: Adding Loopbacks into the OSPF Process
>
>
>> Hi All,
>>
>> Does anybody know how to add a loopback into the OSPF process as a /24
>> without changing the network type ?
>>
>> Thanks in advance.
>>
>> Regards
>>
>> Lee.
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:49 GMT-3