From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Mar 22 2005 - 11:27:09 GMT-3
What's the original ip addr and mask under the loopback interface?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lee
Donald
Sent: Tuesday, March 22, 2005 9:09 AM
To: 'Danshtr'; Lee Donald; 'Cisco certification'
Subject: RE: Adding Loopbacks into the OSPF Process
I have figured it out thanks Dan.
If you use " match interface Loopback1" , under the route-map it keeps it as
a /32.
If you use an access-list it puts it in as a /24.
Thanks for your help guys.
Lee
What is the rest of it Dan ?
-----Original Message-----
From: Danshtr [mailto:danshtr@gmail.com]
Sent: 22 March 2005 13:58
To: Lee Donald
Subject: Re: Adding Loopbacks into the OSPF Process
reditribute connected route-map only_24
On Tue, 22 Mar 2005 13:54:49 -0000, Lee Donald
<Lee.Donald@t-systems.co.uk> wrote:
> Hi All,
>
> Does anybody know how to add a loopback into the OSPF process as a /24
> without changing the network type ?
>
> Thanks in advance.
>
> Regards
>
> Lee.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Best regards, Dan
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:49 GMT-3