From: kuldip singh (dipa.singh@gmail.com)
Date: Wed Mar 16 2005 - 19:49:02 GMT-3
Hi Brian,
R2 has L2 adjacency with R3 as show below:
Rack1R2#sh clns neigh
System Id Interface SNPA State Holdtime Type Protocol
Rack1R6 Et0/0 0060.2fa3.da00 Up 8 L1 IS-IS
Rack1R3 Se0/1 *HDLC* Up 28 L2 IS-IS
On Wed, 16 Mar 2005 17:22:33 -0500, Brian McGahan
<bmcgahan@internetworkexpert.com> wrote:
> Kuldip,
>
> Does R2 have any L2 adjacencies with routers in other areas?
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > kuldip singh
> > Sent: Wednesday, March 16, 2005 1:15 PM
> > To: Group Study
> > Subject: IE LAB2 ISIS
> >
> > Hi
> >
> > I have just been doing lab2 in IE and for some reason I just can't
> get
> > the
> > default route being sent to R6.
> >
> > R2: is level-1-2 router and Router 6 is level-1 router but using sub-
> > interface
> > on ethernet. If I change R6 to level-1-2 router than I can see all the
> > routes ok on R6. But R6 is configured as Level-1 I can't see the
> default.
> >
> > Any suggestions:
> >
> > config on R2:
> >
> > interface Ethernet0/0
> > ip address 132.1.26.2 255.255.255.0
> > ip router isis
> > half-duplex
> > isis circuit-type level-1
> >
> > router isis
> > net 49.0001.0001.0001.0002.00
> > summary-address 51.0.0.0 255.248.0.0
> > redistribute ospf 1
> > passive-interface Loopback0
> >
> >
> > R2: has L1 and L2 routes:
> >
> >
> > R6:
> > interface Ethernet0.26
> > encapsulation dot1Q 26
> > ip address 132.1.26.6 255.255.255.0
> > ip router isis
> >
> >
> > router isis
> > net 49.0001.0001.0001.0006.00
> > passive-interface Loopback0
> > is-type level-1
> >
> >
> > Routes on R6:
> >
> > Rack1R6#sh ip route isis
> > 51.0.0.0/16 is subnetted, 8 subnets
> > i L1 51.3.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.2.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.1.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.0.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.7.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.6.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.5.0.0 [115/10] via 54.1.2.254, ATM0.1
> > i L1 51.4.0.0 [115/10] via 54.1.2.254, ATM0.1
> > 54.0.0.0/24 is subnetted, 2 subnets
> > i L1 54.1.4.0 [115/20] via 54.1.2.254, ATM0.1
> > 150.1.0.0/24 is subnetted, 2 subnets
> > i L1 150.1.2.0 [115/10] via 132.1.26.2, Ethernet0.26
> > Rack1R6#
> >
> > Rack1R6#sh clns neig
> >
> > System Id Interface SNPA State Holdtime Type
> > Protocol
> > Rack1R2 Et0.26 0030.9436.24e0 Up 26 L1
> IS-IS
> > BB1 AT0.1 VC 6 Up 27 L1
> IS-IS
> > Rack1R6#
> >
> > Appreciate any info Thanks
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:46 GMT-3