From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Mar 16 2005 - 19:22:33 GMT-3
Kuldip,
Does R2 have any L2 adjacencies with routers in other areas?
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> kuldip singh
> Sent: Wednesday, March 16, 2005 1:15 PM
> To: Group Study
> Subject: IE LAB2 ISIS
>
> Hi
>
> I have just been doing lab2 in IE and for some reason I just can't
get
> the
> default route being sent to R6.
>
> R2: is level-1-2 router and Router 6 is level-1 router but using sub-
> interface
> on ethernet. If I change R6 to level-1-2 router than I can see all the
> routes ok on R6. But R6 is configured as Level-1 I can't see the
default.
>
> Any suggestions:
>
> config on R2:
>
> interface Ethernet0/0
> ip address 132.1.26.2 255.255.255.0
> ip router isis
> half-duplex
> isis circuit-type level-1
>
> router isis
> net 49.0001.0001.0001.0002.00
> summary-address 51.0.0.0 255.248.0.0
> redistribute ospf 1
> passive-interface Loopback0
>
>
> R2: has L1 and L2 routes:
>
>
> R6:
> interface Ethernet0.26
> encapsulation dot1Q 26
> ip address 132.1.26.6 255.255.255.0
> ip router isis
>
>
> router isis
> net 49.0001.0001.0001.0006.00
> passive-interface Loopback0
> is-type level-1
>
>
> Routes on R6:
>
> Rack1R6#sh ip route isis
> 51.0.0.0/16 is subnetted, 8 subnets
> i L1 51.3.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.2.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.1.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.0.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.7.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.6.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.5.0.0 [115/10] via 54.1.2.254, ATM0.1
> i L1 51.4.0.0 [115/10] via 54.1.2.254, ATM0.1
> 54.0.0.0/24 is subnetted, 2 subnets
> i L1 54.1.4.0 [115/20] via 54.1.2.254, ATM0.1
> 150.1.0.0/24 is subnetted, 2 subnets
> i L1 150.1.2.0 [115/10] via 132.1.26.2, Ethernet0.26
> Rack1R6#
>
> Rack1R6#sh clns neig
>
> System Id Interface SNPA State Holdtime Type
> Protocol
> Rack1R2 Et0.26 0030.9436.24e0 Up 26 L1
IS-IS
> BB1 AT0.1 VC 6 Up 27 L1
IS-IS
> Rack1R6#
>
> Appreciate any info Thanks
>
>
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:46 GMT-3