From: Bob Sinclair (bsin@cox.net)
Date: Sat Feb 26 2005 - 13:39:25 GMT-3
SHO,
I am pretty sure that it is not currently possible to change the AD of
particular external EIGRP routes. Works for internal, but not external,
AFAIK. This is unlike most other protocols. You can change the distance of
ALL external prefixes with the command: distance eigrp.
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: SHO SHO
To: ccielab@groupstudy.com
Sent: Saturday, February 26, 2005 9:53 AM
Subject: How to change the AD of EIGRP external route
Hi,
Im trying to change the AD of EIGRP specific external route.
Here is a example.
R1-----(OSPF)----R2-----(EIGRP)-----R3
NW:1 ->
NW:2 ->
NW:3 ->
On R2, NW:1,2,3, are redistributed to EIGRP domain.
Every NW:1,2,3 are seen as external route of AD:170 on R3.
Now, I would lile to change the AD of NW:2 to AD:120.
Is it possible to change like this ?
Thanks
SHO
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3