RE: How to add input service policy on atm?

From: Ivan Ostre¹ (ivan.ostres@snt.hr)
Date: Sat Feb 26 2005 - 07:08:31 GMT-3

• Next message: my-ccie-test@libero.it: "ISIS Full mesh adjiacency"
• Previous message: azhar mumtaz: "Re: Tracking Multiple IP Addresses and Inserting a Default"
• Maybe in reply to: Ivan Ostre¹: "How to add input service policy on atm?"
• Next in thread: Ivan Ostre¹: "RE: How to add input service policy on atm?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

the link you provided shows setting OUTPUT service policy to ATM which works
fine. The thing I've been asking was INPUT service policy per SVC (or per int
or subint since I have just one svc).

Ivan

________________________________

From: Balaji Siva [mailto:bsivasub@gmail.com]
Sent: sub 26.2.2005 5:06
To: Ivan Ostre9
Cc: ccielab@groupstudy.com
Subject: Re: How to add input service policy on atm?

It should work. what version are you running..

See this for an example
http://www.cisco.com/warp/customer/121/mc3810_cos.html

On Fri, 25 Feb 2005 18:49:10 +0100, Ivan Ostre9 <ivan.ostres@snt.hr> wrote:
> Hello group,
>
> is it possible to add input service policy to atm svc (with subs or
without)?
> If possible, how? Whatever I try, it sometimes
> accepts the command but it is not seen in 'sho run' or 'sh policy int'.
>
> Regards,
> Ivan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: my-ccie-test@libero.it: "ISIS Full mesh adjiacency"
• Previous message: azhar mumtaz: "Re: Tracking Multiple IP Addresses and Inserting a Default"
• Maybe in reply to: Ivan Ostre¹: "How to add input service policy on atm?"
• Next in thread: Ivan Ostre¹: "RE: How to add input service policy on atm?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3