From: Ivan Ostre¹ (ivan.ostres@snt.hr)
Date: Sat Feb 26 2005 - 07:43:31 GMT-3
I've been thinking about it a bit, and it could be that you can't attach
service policy to atm svc when using some of the ATM QoS things like ubr
because it doesn't really guarantee any bandwidth. The thing is that I don't
have access to some atm interface to try it right now. If anyone have a few
spare minutes to try it, I would appreciate it.
It might work with abr....
Ivan
P.S: if anyone will try it, please post 'sho run int atm x/x' and 'sh policy
int'
________________________________
From: Balaji Siva [mailto:bsivasub@gmail.com]
Sent: sub 26.2.2005 5:06
To: Ivan Ostre9
Cc: ccielab@groupstudy.com
Subject: Re: How to add input service policy on atm?
It should work. what version are you running..
See this for an example
http://www.cisco.com/warp/customer/121/mc3810_cos.html
On Fri, 25 Feb 2005 18:49:10 +0100, Ivan Ostre9 <ivan.ostres@snt.hr> wrote:
> Hello group,
>
> is it possible to add input service policy to atm svc (with subs or
without)?
> If possible, how? Whatever I try, it sometimes
> accepts the command but it is not seen in 'sho run' or 'sh policy int'.
>
> Regards,
> Ivan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3