From: Tom Young (gitsyoung@yahoo.co.jp)
Date: Thu Feb 24 2005 - 12:14:17 GMT-3
the parameter I set is percent , not the bandwidth
keyword.
the sum bandwidth i set is 100 percent of serial
interface.
--- jatinder.p.singh@bt.com $B$+$i$N%a%C%;!<%8!'(B
> Tom ,
>
> You have to put the Max reserve bandwidth command
> under serial interface
> to make it work.
>
> Regards
>
> J P Singh
> CCIE :- 13620
> BT Global Services
> Tel: +44 1732 475950
> Fax: +44 1732 452335
> Mobile: +44 7714679890
> E-mail: jatinder.p.singh@bt.com
> www.bt.com
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from
> British
> Telecommunications plc which may be privileged or
> confidential. The
> information is intended to be for the use of the
> individual(s) or entity
> named above. If you are not the intended recipient
> be aware that any
> disclosure, copying, distribution or use of the
> contents of this
> information is prohibited. If you have received this
> electronic message
> in error, please notify us by telephone or email (to
> the numbers or
> address above) immediately.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Tom Young
> Sent: 24 February 2005 14:56
> To: ccielab@groupstudy.com
> Subject: CBWFQ is bandwidth sum is 100%
>
>
> Hi, group
>
> Look at the sample below for CBWFQ, two classes
> was
> made and the sum of bandwidth is 100%(one is 20 and
> one is
> 80), because I want to devide the bandwidth for two
> remote offices that
> bandwidth is different. From some cisco document , I
> have been hear if
> made two class its bandwidth sum is 100%, policy
> will not work well ?
> Does it right ?
>
> thanks alot
>
> class-map match-all YSD
> match access-group 110
> class-map match-all TP
> match access-group 120
> !
> policy-map BANDSHAPER
> class YSD
> bandwidth percent 20
> class TP
> bandwidth percent 80
> class class-default
> fair-queue
> !
> interface Ethernet1/0
> service-policy output BANDSHAPER
> !
> access-list 110 permit ip any 132.6.0.0 0.0.255.255
> access-list 110 permit ip any host 203.1.110.3
> access-list 110 permit ip any host 139.110.6.1
> access-list 110 deny ip any any
>
> access-list 120 permit ip any 132.9.0.0 0.0.255.255
> access-list 120 permit ip any host 203.1.110.4
> access-list 120 permit ip any host 139.110.9.1
> access-list 120 deny ip any any
>
> __________________________________
> Let's Celebrate Together!
> Yahoo! JAPAN
> http://pr.mail.yahoo.co.jp/so2005/
>
>
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3