From: Dillon Yang (gzdillon@hotmail.com)
Date: Wed Feb 23 2005 - 09:08:01 GMT-3
Go to http://www.cisco.com/warp/public/104/ospfdb7.html
or
search in http://www.groupstudy.com/cgi-bin/search
HTH
dillon
----- Original Message -----
From: "kuldip singh" <dipa.singh@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Wednesday, February 23, 2005 7:32 PM
Subject: Discontiguous OSPF Area 0
> -------------------------R5-------------------------------R6-----------------------------------R7----------------
> OSPF Area 0 OSPF Area 3 OSPF Area 0
>
>
> Loopback on R5: 200.0.0.5
> Loopback on R6: 200.0.0.6
> Loopback on R7: 200.0.0.7
>
> Link between R5 and R6:
> 150.50.7.5 & 150.50.7.6
>
> Area 0 discontiguous but not allowed to use virtual link.
>
> R5 Loopback in Area 0
> R6 Loopback in Area 0
>
> Configured Tunnel between R5 and R6:
>
> int tunn 0
> ip unnumbered loopback 0
> tunn source 150.50.7.5
> tunn des 150.50.7.6
>
> int tunn 0
> ip unnumbered loopback 0
> tunn source 150.50.7.6
> tunn dest 150.50.7.5
>
> The OSPF Neighbor failed to build between R5 and R6 over the tunnel.
> Then I configured the virtual link between R5 and R6, OSPF neigbor
> relationship built
> over the tunnel.
>
> If I run RIP between R5 and R6 then OSPF works fine over the tunnel
> and the OSPF area 0 is connected.
>
> Do we have to run another protocol between the discontiguous OSPF Area 0 ?
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3