From: kuldip singh (dipa.singh@gmail.com)
Date: Wed Feb 23 2005 - 08:32:37 GMT-3
-------------------------R5-------------------------------R6-----------------------------------R7----------------
OSPF Area 0 OSPF Area 3 OSPF Area 0
Loopback on R5: 200.0.0.5
Loopback on R6: 200.0.0.6
Loopback on R7: 200.0.0.7
Link between R5 and R6:
150.50.7.5 & 150.50.7.6
Area 0 discontiguous but not allowed to use virtual link.
R5 Loopback in Area 0
R6 Loopback in Area 0
Configured Tunnel between R5 and R6:
int tunn 0
ip unnumbered loopback 0
tunn source 150.50.7.5
tunn des 150.50.7.6
int tunn 0
ip unnumbered loopback 0
tunn source 150.50.7.6
tunn dest 150.50.7.5
The OSPF Neighbor failed to build between R5 and R6 over the tunnel.
Then I configured the virtual link between R5 and R6, OSPF neigbor
relationship built
over the tunnel.
If I run RIP between R5 and R6 then OSPF works fine over the tunnel
and the OSPF area 0 is connected.
Do we have to run another protocol between the discontiguous OSPF Area 0 ?
Thanks
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:24 GMT-3