From: Munsar (munsar@optonline.net)
Date: Sat Feb 19 2005 - 14:37:11 GMT-3
I don't see a network statement for this network, you need it for BGP to
advertise to any neighbors. Thx.
----- Original Message -----
From: "k c" <jwongccie@yahoo.com.hk>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 19, 2005 11:23 AM
Subject: BGP route cannot advertise to neighor (sync problem)
> Hi Group,
>
> R2 cannot advertise 3.0.0.0/8 to R1 due to synchronization. But why? BGP
> and ospf router ids are the same. ospf has route 3.0.0.0/8 and bgp has
> 3.0.0.0/8 route, why it cannot be advertised to R1
> R2 config:
> router bgp 64600
> synchronization
> bgp router-id 172.16.123.2
> bgp log-neighbor-changes
> network 2.2.2.0 mask 255.255.255.0
> neighbor 172.16.123.1 remote-as 100
> neighbor 172.16.123.3 remote-as 64600
> no auto-summary
> sh ip route ospf
> O IA 3.0.0.0/8 [110/65] via 172.16.123.3, 00:31:32, Serial4/0
> sh ip bgp
> * i3.0.0.0 172.16.123.3 0 100 0 i
> R2#sh ip bgp 3.0.0.0
> BGP routing table entry for 3.0.0.0/8, version 14
> Paths: (1 available, no best path)
> Not advertised to any peer
> Local
> 172.16.123.3 from 172.16.123.3 (172.16.123.1)
> Origin IGP, metric 0, localpref 100, valid, internal, not
> synchronized
>
> Thanks,
>
>
>
> ---------------------------------
> Yahoo! $u(c&C - $:8m(>$n<u%X5x5!$u/`!I
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:23 GMT-3