From: Golia, Jeff (JGOLIA@twportanddistribution.com)
Date: Tue Feb 15 2005 - 10:55:19 GMT-3
Hello, A brief question about multilink configuration.
the requirements of this state "maximize throughput on the ISDN circuit
configure your network so that R4 and R5 fragment all traffic amongst both
ISDN B channels. Fragmentation sould occur regardless of the utilization of
the first B channel."
When I first did this lab, I used these commands:
ppp multilink interleave
ppp multilink load-thresh 1
The solution states:
ppp multilink
ppp multilink links min 2
I think my solution is preferable due to the interleave keyword usage. It
specifically mentions the fragmentation asked for. I tried using the
interleave keyword on the IE supplied solution, and it makes multilink not
come up (1 B channel only). Also when viewing the stats of each separate B
channel (sh int bri 0 1; sh int bri 0 2) the stats look deceivingly similar.
COMMENTS?????
Thank you.
Jeff Golia, CCNP MCSE
Network Administrator
Transworld Port and Distribution Services
Wilmington, Delaware
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:21 GMT-3