From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Fri Feb 11 2005 - 07:05:48 GMT-3
Mani,
I think you have the ending time right but not the starting time.
The way I understand it is as follows,
periodic weekdays 17:00 to 23:59
periodic weekdays 0:00 to 7:59
Time starts at the beginning not at 1 minute on. 1 Minute on is into the
next hour, so it will end at 23:59 because that is the last minute before
the new hour starts. 12:00:01 is within the following hour, and the first
minute of an hour starts at 00:00:01.
I hope that makes sense??
It does to my twisted head.
-----Original Message-----
From: mani poopal [mailto:mani_ccie@yahoo.com]
Sent: 10 February 2005 14:03
To: ccielab@groupstudy.com
Subject: TIME RANGE ACCESS-LISTS
Hi Group,
I have a doubt about time definitions in the time range access-list, pls
look at the following time range access-lists for time specified(A, B and C)
and any feed back is appreciated.
============================
TIME RANGE ACCESS-LISTS:
A.telnet WEEKDAYS FROM 8AM-5PM
B.HTTP AFTER HOURS WEEKDAYS
C.ALL TRAFFIC ON WEEKENDS AT ANY TIME
access-list 101 permit tcp any any eq 23 time-range TELNET
access-list 101 permit tcp any any eq www time-range HTTP
access-list 101 permit ip any any time-range ANY
time-range ANY
periodic weekend 0:00 to 23:59<---ARE THESE RIGHT
time-range TELNET
periodic weekdays 8:00 to 17:00
time-range HTTP
periodic weekdays 17:01 to 23:59<--ARE THESE RIGHT
periodic weekdays 0:01 to 7:59 <--ARE THESE RIGHT
interface Ethernet0
ip access-group 101 out
THANKS
MANI
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:19 GMT-3