From: CCIE Group Study (ccie@madisonsolutions.net)
Date: Mon Feb 07 2005 - 09:42:41 GMT-3
Good morning:
The problem for the CCIE R&S Labs is that the cisco 2600xm series is the
approved router at the low end for routers. The older 2600 series does not
have enough memory or CPU to run the 12.2.15T Enterprise Plus.
If you are using a cisco 2600 you will not be able to configure OSPF-3,
(IPv6) but can configure RIP, EIGRP and ISIS with IPv6. The 2500 series
does support OSPF-3 when using 12.2.15T14 IP Plus, (
c2500-is-l.122-15.T14.bin ) with 16M/16F.
George Morton, Ph. D.
----- Original Message -----
From: "Qahtani, Mohammed S.(ECC)" <mohammed.qahtani.7@aramco.com>
To: <ccielab@groupstudy.com>
Sent: Monday, February 07, 2005 1:11 AM
Subject: Recommended IOS for 2620 routers
> Hello group,
>
> I'm using Cisco 2620 with 32M flash and 64M memory. I've tried to run
> several IOS that support encryption, MPLS, IPSec, etc. but main memory
> was not sufficient and routers kept rebooting.
>
> What is the minimum IOS that I could run on these routers and still
> meets the lab exam requirements?
>
>
>
>
>
> Thank you,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:17 GMT-3