From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Thu Feb 03 2005 - 15:58:22 GMT-3
Tim,
How have you configured the Hub (e.g. R3)?
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Thursday, February 03, 2005 4:48 AM
To: Group Study
Subject: Frame Relay Static maps -- Part 2
Hi again,
I tried some variations with the broadcast key on the static fram maps.
Here's what I found:
If I add the broadcast keyword to the static maps on the spokes but not
on the hub, the same thing occurs -
I get a !.!.! result when I ping spoke to spoke.
If I add the broadcast keyword to only the static map on the hub, I get
the !!!! result when I ping spoke to spoke.
So, here's my conclusion:
If the broadcast keyword is omitted from the hub every other ping will
fail.
If the broadcast keyword is included on the hub, all the pings will
succeed.
Can anyone explain why that is?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:17 GMT-3