RE: ISDN - Dialer Map IP

From: Vijaybhasker.Vuppala2@ge.com
Date: Fri Jan 28 2005 - 15:39:50 GMT-3

• Next message: Vijaybhasker.Vuppala2@ge.com: "RE: Filtering with in Static Redistribution in to EIGRP"
• Previous message: Walker, James - Is: "RE: ATM Back to back Question"
• Maybe in reply to: Jonathan ZD: "ISDN - Dialer Map IP"
• Next in thread: Brian McGahan: "RE: ISDN - Dialer Map IP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

one the called site(receiving side), I haven't added any dialer-map or
dialer-group and dialer-list still it works....

Mani...are you sure, if yes, can you explain why it's required....

-----Original Message-----
From: mani poopal [mailto:mani_ccie@yahoo.com]
Sent: Friday, January 28, 2005 5:11 AM
To: Jonathan ZD; CCIE - GS
Subject: Re: ISDN - Dialer Map IP

Hi John,
 
You need both dialer-list, dialer-group and dialer-map commands but you
don't have to specify dialer-string in the dialer map statement. The
reason, if you want to configure a DDR(dial on demand routing) you must have
dialer-list, dialer-group and dialer-map commands.
 
Mani

Jonathan ZD <Nuvo25@hotmail.com> wrote:
Hello GS,

I need the clearification for ISDN configuration:

On the called side (router that receive the call) that will not make any
call
to any other peers, do the commands "dialer map ip" and "dialer-group" are
needed on the bri-int configuration?

Thanks,

Jone

• Next message: Vijaybhasker.Vuppala2@ge.com: "RE: Filtering with in Static Redistribution in to EIGRP"
• Previous message: Walker, James - Is: "RE: ATM Back to back Question"
• Maybe in reply to: Jonathan ZD: "ISDN - Dialer Map IP"
• Next in thread: Brian McGahan: "RE: ISDN - Dialer Map IP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:27 GMT-3