Re: ISDN - Dialer Map IP

From: mani poopal (mani_ccie@yahoo.com)
Date: Fri Jan 28 2005 - 08:11:01 GMT-3

• Next message: David Duncon: "Filtering with in Static Redistribution in to EIGRP"
• Previous message: mani poopal: "Re: IpV6 Study"
• Maybe in reply to: Jonathan ZD: "ISDN - Dialer Map IP"
• Next in thread: Vijaybhasker.Vuppala2@ge.com: "RE: ISDN - Dialer Map IP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi John,
 
You need both dialer-list, dialer-group and dialer-map commands but you don't have to specify dialer-string in the dialer map statement. The reason, if you want to configure a DDR(dial on demand routing) you must have dialer-list, dialer-group and dialer-map commands.
 
Mani

Jonathan ZD <Nuvo25@hotmail.com> wrote:
Hello GS,

I need the clearification for ISDN configuration:

On the called side (router that receive the call) that will not make any call
to any other peers, do the commands "dialer map ip" and "dialer-group" are
needed on the bri-int configuration?

Thanks,

Jone

• Next message: David Duncon: "Filtering with in Static Redistribution in to EIGRP"
• Previous message: mani poopal: "Re: IpV6 Study"
• Maybe in reply to: Jonathan ZD: "ISDN - Dialer Map IP"
• Next in thread: Vijaybhasker.Vuppala2@ge.com: "RE: ISDN - Dialer Map IP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:26 GMT-3