From: Danshtr (danshtr@gmail.com)
Date: Thu Jan 27 2005 - 12:56:18 GMT-3
It is needed.
The router needs to map between L3/L2 address (such as IP) to the
other end of the call.
The dialer-group might be needed. Dialer group will reset the
idle-timeout timer. So it depend on what you need to do.
HTH
On Thu, 27 Jan 2005 07:34:24 -0800, Jonathan ZD <Nuvo25@hotmail.com> wrote:
> Hello GS,
>
> I need the clearification for ISDN configuration:
>
> On the called side (router that receive the call) that will not make any call
> to any other peers, do the commands "dialer map ip" and "dialer-group" are
> needed on the bri-int configuration?
>
> Thanks,
>
> Jone
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Best regards, Dan<a href="http://www.spreadfirefox.com/?q=affiliates&id=0&t=1">Get Firefox!</a>
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:26 GMT-3