From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Mon Jan 24 2005 - 08:39:09 GMT-3
I may be wrong, but my way of thinking is that all commands that are
needed before routers can establish the physical-logical relation are
needed in both places, and the rest can go only in the logical if.
So I would guess that in the calling router, it will work even if you
put it on the dialer interface only. You need it in the physical if on
the receiving side (cause it does not know who is calling by the time it
has to establish MPPP). Have not tried it, let me know if you do.
(On the other side, it does not hurt if you do put it *everywhere* :)
ccie2be wrote:
> Hi guys,
>
> Usually, when I need to configure ppp multilink, I configure it on both the
> dialer and bri interface.
>
> What I don't know is when this command is and isn't needed on both the
> physical and logical interfaces.
>
> Can somebody explain this?
>
> TIA, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3