From: steve.skinner@uk.pwc.com
Date: Mon Jan 24 2005 - 13:30:07 GMT-3
guys,
taken from the CCO
http://www.cisco.com/warp/public/131/mppp-ddr.html
Configure the PPP multilink command (on both routers) under the physical
interface and the dialer interface (if using dialer profiles).
HTH
Stephen Skinner
"ccie2be"
<ccie2be@nyc.rr.com To: "Richard Dumoulin" <Richard.Dumoulin@vanco.fr>, "Roberto Adjakou"
> <radjakou@cfao.sn>, "Group Study" <ccielab@groupstudy.com>
Sent by: cc:
nobody@groupstudy.c Subject: Re: int bri & int dialer & ppp multilink
om
24/01/2005 15:26
Please respond to
"ccie2be"
RE: int bri & int dialer & ppp multilinkHmmm, it sounds like the best
course
to take is to just configure all ppp commands on both the physical and
logical
interface.
The problem with that, though, is that I vaguely recall there are
scenario's
where that doesn't work - I just can't rememeber what those
scenario's are.
Thanks
----- Original Message -----
From: Richard Dumoulin
To: ccie2be ; Roberto Adjakou ; Group Study
Sent: Monday, January 24, 2005 8:54 AM
Subject: RE: int bri & int dialer & ppp multilink
Some years ago with the 11.X IOS versions I noted a difference between
making an ISDN call and receiving one.
When making the call (from the caller router standpoint) the IOS used the
pp
commands of the dialer but when receiving it, it used the ppp commands of
the
BRI interface.
-- Richard
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Monday, January 24, 2005 2:44 PM
To: Roberto Adjakou; Group Study
Subject: Re: int bri & int dialer & ppp multilink
Robert,
That's only true sometimes, with only some commands. The problem is I
don't
know when that's true and for which ppp
commands.
----- Original Message -----
From: "Roberto Adjakou" <radjakou@cfao.sn>
To: "ccie2be" <ccie2be@nyc.rr.com>; "Group Study"
<ccielab@groupstudy.com>
Sent: Monday, January 24, 2005 3:00 AM
Subject: RE: int bri & int dialer & ppp multilink
> Ppp commands shall be used under logical and physical interfaces.
>
> -----Message d'origine-----
> De : ccie2be [mailto:ccie2be@nyc.rr.com]
> Envoyi : dimanche 23 janvier 2005 21:20
> @ : Group Study
> Objet : int bri & int dialer & ppp multilink
>
> Hi guys,
>
> Usually, when I need to configure ppp multilink, I configure it on both
the
> dialer and bri interface.
>
> What I don't know is when this command is and isn't needed on both the
> physical and logical interfaces.
>
> Can somebody explain this?
>
> TIA, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient. If you are
not
the intended recipient or the person responsible for delivering it to the
intended recipient, be advised that you have received this email in error
and
that any dissemination, distribution, copying or use is strictly
prohibited.
If you have received this email in error, or if you are concerned with
the
content of this email please e-mail to: e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. While the sender has taken
every
reasonable precaution to minimise this risk, we cannot accept liability for
any damage which you sustain as a result of software viruses. You should
carry
out your own virus checks before opening any attachments to this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3