From: ccie2be (ccie2be@nyc.rr.com)
Date: Sun Jan 23 2005 - 17:36:46 GMT-3
It's only really required if you doing callback based on name.
HTH, Tim
----- Original Message -----
From: "Anthony Sequeira" <terry.francona@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Sunday, January 23, 2005 2:48 PM
Subject: dialer map NAME option
> Hi all!
>
> OK - what is the real deal with the NAME option that you can add to a
> dialer map?
>
> I have left it out of the following one-way CHAP configuration and
> things work just great!
>
> Why is it necessary then? What is it really doing? Why does my example
> below work?
>
> Rack2R4
> username Rack2R5 password 0 CISCO
> !
> interface BRI0/0
> ip address 136.2.45.4 255.255.255.248
> encapsulation ppp
> dialer map ip 136.2.45.5 broadcast 5272025
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 5272024
>
>
> Rack2R5
> username Rack2R4 password 0 CISCO
> !
> interface BRI0/0
> ip address 136.2.45.5 255.255.255.248
> encapsulation ppp
> dialer map ip 136.2.45.4 broadcast 5272024
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 5272025
> ppp authentication chap
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3