dialer map NAME option

From: Anthony Sequeira (terry.francona@gmail.com)
Date: Sun Jan 23 2005 - 16:48:56 GMT-3

• Next message: DaveW: "Re: Join SSM (S,G) channel"
• Previous message: Bob Sinclair: "Re: Join SSM (S,G) channel"
• Next in thread: ccie2be: "Re: dialer map NAME option"
• Maybe reply: ccie2be: "Re: dialer map NAME option"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all!

OK - what is the real deal with the NAME option that you can add to a
dialer map?

I have left it out of the following one-way CHAP configuration and
things work just great!

Why is it necessary then? What is it really doing? Why does my example
below work?

Rack2R4
username Rack2R5 password 0 CISCO
!
interface BRI0/0
 ip address 136.2.45.4 255.255.255.248
 encapsulation ppp
 dialer map ip 136.2.45.5 broadcast 5272025
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 5272024

Rack2R5
username Rack2R4 password 0 CISCO
!
interface BRI0/0
 ip address 136.2.45.5 255.255.255.248
 encapsulation ppp
 dialer map ip 136.2.45.4 broadcast 5272024
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 5272025
 ppp authentication chap

• Next message: DaveW: "Re: Join SSM (S,G) channel"
• Previous message: Bob Sinclair: "Re: Join SSM (S,G) channel"
• Next in thread: ccie2be: "Re: dialer map NAME option"
• Maybe reply: ccie2be: "Re: dialer map NAME option"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3