From: steve.skinner@uk.pwc.com
Date: Tue Jan 11 2005 - 06:40:22 GMT-3
Hi ,
have you tried changing the priority on one end of the link ...
i.e ip ospf priority 0
HTH
Stephen Skinner
"ccie2be"
<ccie2be@nyc.rr.com To: "Group Study" <ccielab@groupstudy.com>
> cc:
Sent by: Subject: osfp over isdn using unicasts
nobody@groupstudy.c
om
11/01/2005 04:14
Please respond to
"ccie2be"
Hi guys,
Has anyone gotten this to work?
This is from IEWB lab 15, task 5.21.
According to IE, the config should be fairly simple and like this:
R4
int bri 0/0
ip ospf network point-to-multipoint non-broadcast
dialer map ip 130.1.45.5 name ROUTER5 5555
ROUTER OSPF 1
net 130.1.45.0 0.0.0.255 area 345
neighbor 130.1.45.5
R5
int bri 0/0
ip ospf network point-to-multipoint non-broadcast
dialer map ip 130.1.45.4 name ROUTER5 4444
ROUTER OSPF 1
net 130.1.45.0 0.0.0.255 area 345
Before changing to the above the config, I had established an ospf
adjacency
between R4 and R5. But, once I changed the config to the above,
the ospf adjacency flapped between down and init.
Any one have any ideas on what is needed to make this work.
TIA, Tim
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:21 GMT-3