From: ccie (ccie@tisolutions.biz)
Date: Tue Jan 11 2005 - 05:43:31 GMT-3
Hi tim
Yep I'm on lab 15 at the mo and I got the section working, by changing
the ospf network type point-tomulti non broadcast. The adj form again.
I can send you my configs if required.
Good luck
Mark
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: 10 January 2005 22:36
To: Group Study
Subject: IEWB lab 15 - lots of mistakes??
Hey guys,
Is it just me, or are there lots of mistakes in this lab and SG?
For example, task 5.21 says to configure all adjacencies in area 345 in
such a manner that other
devices on the segment can't recieive ospf hello packets.
The SG shows the neighbor 130.1.45.5 command used to do this, but when I
try to enter that command,
here's what happens:
Rack1R4(config)#router os 1
Rack1R4(config-router)#nei 130.1.45.5
OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
networks
So, I thought, no big deal. Even though it's not in the SG, I'll just
go and change the ospf network type
on both sides of the link.
After trying both network types, nbma and p2m, neither worked.
Has anyone gotten the config shown in the solution guide to actually
work?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:21 GMT-3