From: Henk de Tombe (henk.de.tombe@qi.nl)
Date: Fri Dec 31 2004 - 04:19:48 GMT-3
Hi Guys,
Don't forget to use the load-interval command, the question is to kick in
the second B-channel if the load on the first B-channel is 60% within 45
seconds. You have to configure load-interval 45 to compute load statistics
on the interface every 45 seconds
Link to load-interval.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun
_r/ffrprt3/frf012.htm#wp1018413
Regards,
Henk
-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens
loc.pham@comcast.net
Verzonden: vrijdag 31 december 2004 06:11
Aan: Ralph; ccielab@groupstudy.com
Onderwerp: Re: ISDN SECOND B CHANNEL:
By using combination of :
ppp multilink load-threshold ( 60% of load ) and ppp timeout multilink add
45
HTH,
LP
> Hey Guys:
>
> How can I configure one end of an ISDN link such that so that when the the
first
> B channel reaches 60% within 45 seconds, the second B dials?
>
> akhen
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:33 GMT-3