From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Dec 29 2004 - 23:48:54 GMT-3
If they don't which authentication to use, you can use either.
However, make sure you read the requirements very, very carefully because
most
likely the type of authentication is implied by something else in the
requirements.
If you're still not sure, ask the proctor for clarification.
HTH, Tim
----- Original Message -----
From: "Rick" <rick@iptool.net>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Wednesday, December 29, 2004 8:45 PM
Subject: Protocol Authentication
> If a task on the lab does specify an authentication type. Let's say it
simply
> says: "use authentication on OSPF area 3 with password of lab" does it
matter
> rather I use simple or message digest?
>
> Another question on the same topic. If I use md5 authentication with a
> protocol that uses a key chain does the key and the key-string get hashed
or
> only the key-string?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:32 GMT-3