From: miken (miken@mail.sisna.com)
Date: Wed Dec 22 2004 - 21:13:40 GMT-3
This is a working clock setup from a 2621XM router with 2 MFT-2T1s. The customer has only two circuits coming in, 0/0 and 0/2. Notice how the network-clock-select is configured. It will take clock from 0/0.
network-clock-participate slot 1
network-clock-participate aim 0
network-clock-select 1 T1 0/0
network-clock-select 2 T1 0/2
network-clock-select 3 T1 0/1
network-clock-select 4 T1 0/3
Thanks
MikeN
---------- Original Message ----------------------------------
From: "Cocimano, Francesco" <FC183400@NCR.COM>
Reply-To: "Cocimano, Francesco" <FC183400@NCR.COM>
Date: Wed, 22 Dec 2004 13:59:21 +0100
> Hi all,
>my customer has a IMA trunk with 4 E1. The router is 3725 with ATM IMA and
>2MFT-2E1
>How could I configure the clock?
>must I configure network-clock-partecipate per the two wic or must I
>configure network-clock-select too?
>Have you any configuration example?
>Many thanks
>Francesco
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
_________________________________
SISNA...more service, less money.
http://www.sisna.com/exclusive/
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:29 GMT-3