From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Dec 20 2004 - 13:27:43 GMT-3
Ben,
IGMP snooping is used on layer 2 switchports to determine of a
client located on that port has joined a multicast group. This behavior
is enabled by default. To view what information is learned via snooping
issue the "show ip igmp snooping group" command.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> ben
> Sent: Sunday, December 19, 2004 9:46 PM
> To: ccielab@groupstudy.com
> Subject: When should use IGMP SNOOPING on 3550?
>
> In some Multicast cases, it's work that just enable the PIM on the
> according interface, and configure the appropriate multicast mode, in
> these cases, It doesn't to enable the IGMP snooping on the 3550
switch, So
> I am wondering when should use the IGMP snooping on the switch?
>
> Thanks
>
>
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:28 GMT-3