From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Dec 20 2004 - 13:12:56 GMT-3
Lee,
I would recommend that you run the latest 12.2T Enterprise Basic
IOS on the 2600s. To see exactly what you are missing out of this
image, compare it to the same release of the Enterprise Plus feature set
of the 2600XMs or the 3640/3660. You can do this side-by-side
comparison using the Feature Navigator tool on CCO:
http://www.cisco.com/go/fn/
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Lee Carter
> Sent: Saturday, December 18, 2004 11:31 AM
> To: CCIE LAB
> Subject: Best IOS to use for LAB 12.2T
>
> Hi all,
>
> I am finalizing my lab and wanted to know what version
> of code you recomend running on the routers. I have
> the following:
>
> 5 * 2610's (not XM's) 16/64
> 1 * 3640 Frame/Switch Not much memory
> 2 * 1720's Back Bone Routers Not much memory
> 4 * 4500M's 16/32
>
> I am trying to find a 12.2.xT image for them to use so
> I have support for ipv6 but all the 2600 images are
> differed due to bugs. Also, on tbe 4500's if I go to a
> T Train I have to give up Enterprise Plus and go to
> somethign like Enterprise Basic.
>
> Any advice is greatly appreciated.
>
> Thanks,
>
> Lee
>
>
>
> __________________________________
> Do you Yahoo!?
> Send holiday email and support a worthy cause. Do good.
> http://celebrity.mail.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:28 GMT-3