From: alsontra@hotmail.com
Date: Wed Dec 15 2004 - 14:21:35 GMT-3
Geert Nijs,
A product note for the VWIC-2MFT-G703 states that the card supports support
all the features of the other VWIC models.
"Specific models to support E1 G.703 unframed for utilizing the full 2.048
Mbps (Note: The G.703 models can also be configured for framed mode where
they support all the features of the other VWIC models)"
http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_data_s
heet09186a0080091b9c.html
I've got run of the mill VWIC-2MFT-T1 doing IMA at the moment and I'm not
pleased. Many of the errors or conditions result in failures that require
reboots. Anyone else having issue with the ATM AIM VWIC solution?
(They never should have EOL the old IMA modules)
Al
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Geert Nijs
Sent: Wednesday, December 15, 2004 7:04 AM
To: ccielab@groupstudy.com
Subject: VWIC-2MFT-G703 with ATM AIM module ?
Hello group,
Does anyone know if the ATM AIM module for 2600 routers is supported with
VWIC-2MFT-G703 modules ??
There are bundles for sale with E1/T1 VWIC modules, but none with G703
modules ?
Will the ATM AIM modle work with the G703 modules ?? Any ideas ??
Regards,
Geert Nijs
CCIE #13729
############################################################################
#########
This e-mail and any attached files are confidential and may be legally
privileged.
If you are not the addressee, any disclosure, reproduction, copying,
distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac
immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and
complete
transmission of the information, nor for any delay or interruption of the
transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac
employees
are deemed to be professional in nature. Accordingly, the sender or
recipient of
these messages agrees that they may be read by other Simac employees than
the official
recipient or sender in order to ensure the continuity of work-related
activities
and allow supervision thereof.
############################################################################
#########
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:27 GMT-3