From: mani poopal (mani_ccie@yahoo.com)
Date: Sat Dec 11 2004 - 13:29:47 GMT-3
Hi Swaroop,
I am redistributing ospf to eigrp on both r4 and r5 and I am seeing common ospf routes at r3(eigrp router conneted directly to both r4 and r5), At r3 I am seeing all the ospf routes in two directions(D.EX routes from r4 and r5-equal cost path load balancing). Only allowed to do changes at r3 and have to make r3 prefer ospf routes only from r5.
thanks
Mani
Swaroop Potdar <swarooppotdar@hotmail.com> wrote:
well what is it that you want to achieve..without that being clear the
answer wont be clear too..
in this case you can avoid redistributing ospf routes into eigrp on R4 so
that the hub doesnt get the ospf routes through R4 and it will prefer the
routes through R5.
>From: mani poopal
>Reply-To: mani poopal
>To: ccielab@groupstudy.com
>Subject: ospf/eigrp D.EX ROUTE
>Date: Fri, 10 Dec 2004 21:02:38 -0800 (PST)
>
>Hi group,
>
>I have a small question. I am mutually redistributing eigrp and ospf in
>two different places(R5 and R4). In the hub eigrp router, I am seeing all
>ospf routes with D-EX from two redistributed routers. How can I make this
>eigrp router to prefer ospf routes only from one router say R5. I tried
>following command, but it did not work.
>(config-router)#distance 169 5.5.5.5 0.0.0.0 <--I used router ID of R5
>or
>(config-router)#distance 169 111.10.1.5 0.0.0.0<--I used neighbor ip of R5
>
>any help is appreciated
>
>thanks
>
>Mani
>
>
>
>B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
>(416)431 9929
>MANI_CCIE@YAHOO.COM
>
>---------------------------------
>Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Regards,
Swaroop.
------------------------------------------------------------------
Life Is Short & Sweet.
Live It To The Fullest.
------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:26 GMT-3