From: Swaroop Potdar (swarooppotdar@hotmail.com)
Date: Sat Dec 11 2004 - 12:07:35 GMT-3
well what is it that you want to achieve..without that being clear the
answer wont be clear too..
in this case you can avoid redistributing ospf routes into eigrp on R4 so
that the hub doesnt get the ospf routes through R4 and it will prefer the
routes through R5.
>From: mani poopal <mani_ccie@yahoo.com>
>Reply-To: mani poopal <mani_ccie@yahoo.com>
>To: ccielab@groupstudy.com
>Subject: ospf/eigrp D.EX ROUTE
>Date: Fri, 10 Dec 2004 21:02:38 -0800 (PST)
>
>Hi group,
>
>I have a small question. I am mutually redistributing eigrp and ospf in
>two different places(R5 and R4). In the hub eigrp router, I am seeing all
>ospf routes with D-EX from two redistributed routers. How can I make this
>eigrp router to prefer ospf routes only from one router say R5. I tried
>following command, but it did not work.
>(config-router)#distance 169 5.5.5.5 0.0.0.0 <--I used router ID of R5
>or
>(config-router)#distance 169 111.10.1.5 0.0.0.0<--I used neighbor ip of R5
>
>any help is appreciated
>
>thanks
>
>Mani
>
>
>
>B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
>(416)431 9929
>MANI_CCIE@YAHOO.COM
>
>---------------------------------
>Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Regards,
Swaroop.
------------------------------------------------------------------
Life Is Short & Sweet.
Live It To The Fullest.
------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:26 GMT-3